Direct answer
Choose a spout position from the intended use and filling route, then qualify it on the actual filled pouch. A corner and a top-center position can change how the pouch is held, aimed, emptied, capped and displayed. Send both concepts to the pouch and filling teams for feasibility review; neither position is automatically suitable for every formula or equipment line.
Define the transfer task before choosing a drawing
A refill for a narrow-neck bottle asks a different question from a sauce pouch squeezed over food. Record the receiving opening, viscosity, particles, fill volume, whether the pouch is poured or squeezed, and whether users recap it. Then decide what a successful transfer means: controlled flow, low spill and a manageable remaining product quantity under the brand's test conditions.
P&M's liquid packaging owner supports qualified custom spouted pouch projects. Exact position, fitment, cap and laminate are subject to project review. A manufacturer's spouted-pouch page shows corner and center concepts and identifies effects on pouring, fill and artwork; it does not establish P&M's available tooling or fitment range.
Compare positions on the same filled product
Make a simple side-by-side trial with the same formula, net fill and receiving container. A corner concept may change the aiming angle; a center concept may change the grip and handling symmetry. Those are hypotheses to check, not universal performance promises. Film stiffness, fill level and fitment geometry can change the result.
The spouted-pouch specification guide covers the wider format and material brief. Here the decision is narrower: where the opening should sit for a specific user action.
| Trial question | Corner concept | Center concept |
|---|---|---|
| Grip and aim | Can the user guide the offset outlet into the target? | Can the user hold and aim the centered outlet? |
| Pour and residue | Record spill, flow interruption and remaining product | Record the same outcomes with the same product |
| Cap access | Check turning clearance and grip around the corner | Check turning clearance above the pouch body |
| Filled shape | Check stand-up shape and spout contact in the case | Check the same display and case conditions |
| Artwork | Keep copy clear of the corner seal and fitment | Keep copy clear of the top fitment and seal |
Separate use performance from integrity
A clean pour does not prove a secure spout weld, cap seal or formula compatibility. Define leak and handling checks under the intended storage and distribution conditions, including any inverted orientation that matters. For household formulas, P&M's governed brief requires the exact product category, pH range, viscosity, particles, fill temperature and intended use method before a film or fitment recommendation.
Keep the customer's filled-product and stability responsibility explicit. P&M supplies qualified empty packaging; the brand or filler must validate the filled system and any product-specific shelf-life or chemical-compatibility claim.
Request a position comparison, not a generic spout quote
Send the formula category, viscosity and particles, net fill, receiving container, planned fill method, preferred opening and cap, artwork, case orientation and SKU quantities. Ask which corner or center concepts are actually feasible for the project, what samples can be supplied and which filled-pouch trials the brand or co-packer must perform before approval.
General educational information only. Materials, performance, compliance, claims, quantities, and timing require confirmation for the exact packaging project.